If you're into fashion, you may attach handles to a deflated soccer ball with the top removed, or you can carefully cut bits out of a well-played soccer ball to create a colorful sports cap. These are popular in Brazil where they are called "capoeiras" after the instruments used by pirates before attacking ships.
Deflating a soccer ball will stop it from being too hard and make it more suitable for play on flat surfaces. It's also good to know that balls that have been improperly inflated may look like they have just as much life left in them as a completely flat ball.
Soccer balls that have been damaged by excessive wear and tear can be replaced by purchasing a new ball. If the ball is still soft when squeezed, this means that it has not been used often enough and needs to be pumped up before playing. If it is already hard, then it should not be used any further.
All balls must be cleaned after use to remove any trace of powdery dust which may affect visibility during play. This can be done by wiping them down with a clean, dry cloth. Balls should be kept in a cool, dark place until needed again.
Deflate soccer balls by moistening an inflating needle and carefully placing it into the valve. After inserting the needle, gently press down on the ball until it deflates. Remove the needle and secure it to the deflated ball using tape. To conserve space, stack the deflated balls.
When should you replace the ball? If the ball is still in good shape but is beginning to lose its color, it's time for a new ball. Balls that are completely flat or have large holes can no longer be used effectively. They may look fine on the surface but could contain air inside which would make them unsafe to play with.
What if the ball isn't deflatable? If the ball is no longer usable because it has significant damage or missing panels, take it to a professional ball vendor for repair or replacement. Do not use a ball that has been damaged in any way since this could cause injury when players touch up against it.
How do you inflate a soccer ball? Just as with deflating a soccer ball, you need an air pump to fill a ball with air. Some people like to say that one can tell how long it has been since someone inflated the ball by the state of its valves: if they're closed, then it's time for a new ball; if they're open, then it's still okay to use.
This is not an easy task because the needle needs to be small enough to get inside the ball but large enough to allow air to escape. If not done properly, the ball may not deflate completely or even at all.
The best time to deflate a soccer ball is immediately after use. However, if you do not, there is no problem shipping it. Just make sure to include some form of identification with your return so that we can assign it a proper destination address.
Then remove the needle and wash it thoroughly before using it again.
Softer balls are good for kicking and controlling the ball with your head, whereas harder balls are better for shooting from distance.
The duration that a ball can be softened depends on its make and model, so check the manufacturer's instructions. Generally, a softer ball will deflate more quickly than a hard one.
There are two types of valves used in soccer balls: paneled and crescent-shaped. These terms will be explained in detail below. For now, know that these are some of the most common types of valves found in soccer balls.
Paneled valves are divided into three parts: top panel, middle panel, and bottom panel. In order to inflate or deflate each part independently, you need to have separate needles for each valve panel. Needles are available in different sizes for different applications. It is important not to use a needle smaller than what is specified by the manufacturer because this could lead to leaking problems later on.