In terms of "how much space does a ton of gravel cover?" for a conventional 2 inch depth, 1 ton of gravel may generally cover roughly 108 sq ft, 12 square yards, or 10 square meters of land. You should change their coverage based on the depth necessary. As you add more ton of gravel, the depth will increase.
Here's how much gravel needs to be added to our yard to cover it to a depth of 6 inches: 0.5 ton (500 pounds). At this rate, it would take about five years to fill up your driveway!
That's why it's important to measure the area of the yard that will be used for parking and create a ratio of stone to soil. The smaller the percentage of stone, the faster it will be absorbed by the soil and the less maintenance it will require. %50 rock, %50 sand, and %100 soil = low maintenance yard.
The best type of gravel for your yard is pumice stone. It's non-slip and won't blow away in strong winds. However, if you don't have access to pumice stone, any type of gravel will work fine as long as it's not asphalt-based. As you can see, putting a little effort into your driveway or sidewalk project now will save time and money down the road.
Depending on depth, a ton of gravel might cover anywhere from 20 to 240 square feet. A higher number of rocks per square foot results in a lower covering rate. A depth of 1 inch provides up to 240 square feet of coverage, while a depth of 3 inches reduces the coverage rate to 80 square feet. The more shallow the bed, the faster you can fill it.
The overall thickness of a rock-gravel filter bed affects how much material it will hold. The thicker the bed, the more material it will filter. Thicker beds also tend to be less flexible, so they cannot be used in places where movement is necessary (such as along the shoreline).
A gravel road base covers a large area, but only a thin layer of rock is visible from the surface. A thick layer of asphalt or concrete over a gravel base is also called a road cap. The term "road cap" may also be applied to other types of pavement, such as asphalt or concrete over crushed stone.
Asphalt is a type of tar that's mixed with bitumen (oil shale residue) and heated to create a plastic mass that can be molded into sheets at room temperature. Asphaltic surfacing resists weathering and remains flexible even when cold. It is the most common type of road surface material in North America.
Tons are required for your project. Each ton covers roughly 60 square feet at a depth of 4 inches, 80 square feet at a depth of 3 inches, or 120 square feet at a depth of 2 inches. Because pea gravel does not compact, a compaction ratio is not required. However, do not use this product as ballast beneath vehicles, trailers, or other heavy objects that may cause damage to the surface.
The density of a ton of pea gravel is about 7 pounds per cubic foot, which is similar to that of rock salt. On average, a truckload contains 20 yards of gravel with a maximum load capacity of 70 yards.
Pea gravel is a natural stone and like any other stone has different properties depending on its source. The color of pea gravel varies depending on the type of rock it is made up of but generally it is either white or brown. White pea gravel is made up of calcium carbonate while brown pea gravel is made up of iron ore. Both types of gravel are used in road construction projects because they provide good drainage while also making the road surface look nice.
In terms of price, a ton of pea gravel costs around $10,000. This type of gravel is used primarily for driveway and road construction projects because of its cost effectiveness.