Another team arrives to acid etch the pool in order to roughen the plaster surface and improve the adhesion of the new plaster coat. Some plastering firms will return a third time to apply a "scratch coat," which is a rough, textured bond coat that sticks closely to the old plaster surface while giving an excellent surface for the new plaster coat to bind to. This process must be done with care so as not to damage the acid etched surface.
The final coat is a smooth finish coat used to create a luxurious look for the pool area. This coat is usually white or light colored to match the surrounding areas. It is applied over the scratch coat to give the pool a finished look.
Scratch coating is useful for pools with dark or stained plaster surfaces because it helps to reflect more of the sunlight into the pool instead of inside the house where it can cause damage. The textured surface also allows for the easy removal of any scum or dirt that may collect on the surface during use. Scratch coating the pool every 5 years or so is recommended by some professionals because it gives the pool a chance to shine again without the need for additional acid treatments.
The old plaster is chipped out the next day after the water is drained. Following that, tiling and coping are installed to give your pool the visual and aesthetic makeover it deserves. We will then apply the new surface immediately after the tile and coping have been installed. The final step is to fill the pool with water.
This process should be done by a professional pool contractor because it requires special tools and knowledge. It's important to choose the right company for the job. They will be able to tell you how long each stage of the process will take and any other information that you need to know before starting work on your pool.
Once the plaster has dried, the tiles and copings can be fitted into place. Make sure you have all the correct measurements so there are no surprises when installing the items down the road. Fittings may also need to be purchased in order to connect elements of your pool together (such as connections for the filter system or skimmer pump).
Finally, add some color to your pool with a new swimmer-friendly deck or patio. These additions provide places for family and friends to hang out while not in use for swimming, and they can even function as outdoor living rooms if needed. Some decks include materials that filter sunlight while others require electrical service for lights and air conditioners.
A plaster pool may be sanded to eliminate rough spots and stains. While the roughness has no effect on the pool's construction, it can make swimming unpleasant. Furthermore, the abrasive texture can attract stains that are difficult, if not impossible, to remove with normal cleaning. Before beginning any sanding operation, take the pool out of service so as not to put anyone at risk.
The best way to avoid staining your plaster pool is to keep it clean. The occasional scuffing up with a fine-grit sandpaper will help prevent stones from getting under the plaster and creating an uneven surface. If you do get some dirt under the plaster, use a mild cleaner and let it sit for a few minutes before washing it off. The powdery residue left behind will dry clear.
If you want to sand your pool after it has been painted or coated with another material, first try buffing the surface with a fine-grit sandpaper. This will remove some of the paint or coating and make it easier to sand later. Otherwise, you might have trouble getting the plaster back into its original form.
After sanding, you should apply a coat of polyurethane pool finish to protect the surface of your pool. You can buy this finish at most home improvement stores. Follow the instructions on the package to properly mix and apply the finish.
Plaster is a coating that is placed to the pool shell of your inground pool to make it smoother. It also makes a waterproof seal, preventing harm to your swimming pool. White portland cement, marble dust, and water are used to make conventional white plaster. Light colors such as cream or taupe match well with most house styles while bolder colors such as red or orange can make an area feel more active.
The type of plaster you use will depend on your budget and the look you want for your pool. If you're looking to save money, plain white plaster is all you need. This type of plaster is easy to clean and doesn't stain easily if someone gets cut while playing in the pool. If you want something more decorative, consider using portland cement. You can add flowers, wood grains, or other shapes to give your pool a unique look.
After the plaster has cured (usually within one hour of mixing), you can swim in your pool! You may want to wear gloves when handling the wet cement since it can get slippery.
Regular maintenance is important for your plaster pool to stay safe and usable. Cement pools require more frequent cleaning because the particles in the cement help trap dirt and debris that would otherwise be visible on an ordinary pool. Regular cleanup helps keep your pool clean and attractive.