Insert a curtain rod through the holes at the tops of both fabric panels. Attach them to the wall with curtain rod hooks at the apex window's angle. Join them in the upper center. The bottom of the curtain will be hung on the floor. If you want the curtain to fall to the side, insert the rod into one panel and tie it off there. Then repeat with the other panel.
There are several different types of window treatments available on the market today. They can be as simple as two pieces of material with hooks or buttons used to hold them together, or they can be custom-made curtains or drapes. The choice should be based on how you plan to use your windows, what look you want, and your budget. Here are the most common types of window coverings:
Curtains are the most popular window covering. They can be made of cloth, leather, vinyl, or silk and come in a wide variety of styles. Curtains block out light but allow for some view of the outside world. They usually hang from a metal ring set into the wall near the top of the window or from a wooden pole set into the wall below the casing. The curtain's outer edge is wrapped around this ring or pole. To open a window fully, you must lift the curtain away from the wall.
Draperies are similar to curtains but without the wrapping.
With grommet curtains, you'll almost always need to utilize a tie back. Measure to ensure that this is installed at the same height on both sides of the window frame. Then take each end of the tie back and insert it through a corresponding hole in the curtain rod. Pull the ties straight up through the loop at the top of the curtain and then twist them together where they cross. You can use any material for the tie backs, but we recommend using rope or twine because they're easy to find and come in a variety of colors and styles.
Tie-back curtains are very simple to install and take away clothes easily. They are perfect for people who want to be able to see out their windows while still keeping their clothes clean and presentable.
The best part is that tie-backs don't cost much money and they look great when used with other types of curtains too!
Hang your curtain rod 4 to 6 inches above the window frame to make your windows appear taller. If you previously had your curtain rod hung close to your window frame, you may be able to get away with a quick patch-up over the holes because the curtains will conceal them! If you just have a few tiny holes, try white soap. It works really well for cleaning dishes, too.
If you want to completely replace your curtains, hang them about six inches above the window frame to make your windows look taller.
The purpose of this trick is so that you can see through your windows when it's dark out, even though they may not be open all the way. By fixing the height of your curtain rod, you're allowing more light to come in.
There are two ways to fix a curtain that is too high: cut off the excess fabric or use tape. If the problem fabric is part of a set, you might have to cut off all three panels to make them fit properly again.
To fix a curtain that is too high using tape, first measure the distance from the top of your window frame to the bottom of your curtain rod. Add 2 to 3 inches to this number and choose a tape width equal to or less than this sum. For example, if your measurement from top to bottom is 36 inches, add 2 to 3 inches (48 to 90 inches) for a total of 50 inches.