To simulate "flocking," we painted the tree white with Rust-Oleum 2X Ultra Cover Primer Spray. Then we sprayed our first tree with rose gold spray paint and our second tree with silver spray paint. Cover the light bulbs if your tree is pre-lit. Before assembling the Christmas tree, spray paint it in sections. Let the tree dry between coats.
The easiest way to coat a tree with multiple colors is to use two different spray paints. For example, you could cover the trunk of the tree with rust color and give the branches silver color for some extra sparkle. You can also use one spray paint for each color, but make sure to clean off any previous coats before applying more.
Christmas trees come in all shapes and sizes, so you may need to do a little experimenting to find the best method for how much dust this project creates. However, even though this task is a bit messy, it's not difficult and is worth doing if you want to add some flair to your holiday decorating.
Place the tree in a tree stand outside, cover it with a drop cloth, and paint it with glossy white spray paint. Use the paint to cover as much of the tree as possible. 3. Allow the tree to completely dry before removing the tape and starting to decorate.
After the holiday season, you may leave the lights on a pre-lit artificial tree. All you have to do with pre-lit Christmas trees is check for broken lights. Alternatively, you can just add more lights to your tree to make it shine even brighter. It's not dangerous to play with the lights on a pre-lit tree, but be careful not to touch any wires! If you remove all the lights from a pre-lit tree, then it is no longer safe and should be put out for trash.
Pre-lit trees come in many different colors and styles. They usually take up less room in your home and are ready to use right away. However, homemade trees give you more control over how they look. You can choose what kind of lights to use and where to put them. Also, you can decorate the tree any way you want before putting up the ornaments and lights.
The type of tree you get depends on how much you want to spend and what type of shape your yard is in. For example, if you live in a flat area then a flat-top tree will fit better than one with a high center. The same thing goes for decorations. Flat decorations look best on a flat tree.
You also need to think about how you are going to transport your tree after the holidays.
Silver, gold, and copper in matte, sparkle, and glossy textures are ideal for your Christmas tree. You can use simply one color or all of them at once. For a more neutral effect, blend metallic decorations with white ornaments. Use silver balls for an elegant touch or go for gold if you want to make your tree feel more festive.
The type of wood affects what kind of ornament is recommended for it. Pine is the most popular choice for ornamental trees because it grows fast and has good resistance to pests and diseases. However, pine is also very sensitive to heat and humidity so keep that in mind when choosing ornaments. Pines do not grow large branches so select a shape that will still be attractive when placed on a small tree.
Spruce, fir, and cypress are other common choices for Christmas trees. They have longer growing periods than pines but their wood is also more durable. So if you can handle a tree that won't be trimmed for several years then spruces and firs are perfect choices. But remember, these trees don't grow too big so choose your ornaments carefully.
Christmas trees grown from seed fall under the category of hybrid trees. These require special care because they are highly susceptible to pests and diseases.
Paint (Latex) One type of DIY whitewash for trees uses exterior latex paint as its main ingredient. To deflect the sun's rays away from the tree's bark, use a pure white paint. The whitewash is made by combining equal parts water and latex paint. You can make your own whitewash or buy it pre-made. Let the mixture dry before you touch it up.
There are several types of paints that can be used for this purpose. Exterior latex paint is the most effective because it will not wash off in rainstorms. It also makes cleaning the tree after you're done whitewashing it easy. If you use an oil-based paint, apply it with a brush instead. They will need to cure before they can be used again so allow enough time for this to happen.
If you want to use color other than white in your whitewash recipe, go ahead. Use bright colors if you want, but make sure they won't run when it rains so as not to change the appearance of your yard permanently.
The best part about using whitewash to whitewash a tree is that it requires very little effort and can make a big difference on how it looks. Not only that, but also has few long-term effects on the tree. As long as you keep up with the whitewashing process every year or so, the tree will remain healthy.
Many people fill spray bottles with water to protect the tree from drying out in addition to keeping water accessible for the tree to absorb. Spray your tree with room temperature water at least once a day, but only while the Christmas lights are turned off and unplugged. Let the water soak in for about 20 minutes before moving on to the next section.
Painting the trunks of trees with white latex paint (do not use oil-based paint) protects them from southwest damage. Painting the tree trunk with white latex paint (diluted to half strength with water) reduces the trunk's heat throughout the day. This allows the tree to retain more of its green color and not turn brown during hot summers.
It is recommended to apply two coats of paint, at least one week apart, for best results. If you want to speed up the process, you can let some of the coatings dry before applying another one. However, make sure that there is no moisture on the bark when painting so it does not create a wet area that will allow insects to live in the tree.
After the paint has dried, call in a professional arborist or tree surgeon to treat any damaged or diseased tissue before it further spreads into other areas of the tree.
How to Hang Tree Lights on a Man-Made Tree. Many fake Christmas trees are available in pieces that open up like umbrellas. If you use little tree lights, you may wrap them around the branches and leave them on all the time—just remember to light each area separately! If you want to save energy, you can always go this route. Also, if you don't want to spend money on real lights, you can get inexpensive glow sticks or small candles that look like stars that will work just as well.
So, yes, you can put lights on a fake tree!