Because high chairs are subjected to a lot of wear and tear, a clear finish is essential for protecting the paint work. Spray a clear lacquer in two thin, even coats and let it dry completely before reassembling the chair. The final step is to give the chair a good-looking finish by adding some decorative touches such as trim or knobs. You can find many design ideas on line or in home improvement stores.
If you want to add some color to your kitchen, choose a single color for the chair. Then use a color-matching cookbook to select recipes that will go with the high chair. For example, you could pick red meat dishes for a fiery look or green vegetables for a fresh touch. It's your choice but make sure that whatever color you choose, it blends in well with your kitchen decor.
You should also consider the material used to construct the high chair when choosing a color. If you go for a vinyl or leather-look product, you can get matching accessories which will help create a cohesive color scheme. Otherwise, stick to simple colors like red or white for maximum visibility.
Finally, keep in mind that children can be very imaginative, so if you want to avoid any controversy, it's best to leave painting the chair to adults rather than kids!
Use a can of X-O. Rust Paint & Primer in One or EasyCare (r) Premium Decor Spray Enamel to apply a thin layer of paint (satin finish is ideal for plastic). Spray in a sweeping motion while holding the can at least 12 inches away. Allow the paint to dry completely before adding another layer to the plastic chair. If you miss any spots, then these areas will need to be re-painted later.
Plastic furniture should not be painted using an oil-based paint. These types of paints are designed for wood and other non-plastic materials. They contain additives that will break down over time if exposed to sunlight or water. As a result, the paint quality and color may fade away.
Instead, use a water-based paint for plastic furniture. These types of paints are easy to clean up after use and don't require any additional treatments such as top coats or polish. When painting your plastic furniture, it's important to follow all safety instructions provided by the manufacturer.
It is not necessary to remove all of the paint and smooth it entirely; only remove any loose or flaking parts. There were some rust patches where the paint had worn away over time. The chair arms were quite rusted in some places, which is where a random orbit sander comes in helpful. I used 120-grit sandpaper to take off the last bits of paint and roughen up the surface area so I could prime and finish the chair.
You can use this method with other types of furniture too. Just make sure that you don't leave any raw wood areas where dust will collect or you may have a problem with fungal growth later.
Overall, I was able to get the chair done in one evening, so it's really easy and convenient if you need to get something painted for your house.
Yes, leather can be spray painted. Just go really gently. As in, start with ONE LIGHT COAT and work your way up to roughly 20 coats. Wipe away any residual paint that hasn't been absorbed, and you've got a wonderful new chair. No chips, no runs, it's all silver now.
The best thing about leather is its ability to rebound after being hit or scratched. So even if you do get some paint on it, you don't have to worry about it rubbing off.
Also note that if you use a dark color spray paint, such as black, your leather will look much more dramatic. If you want it to look less flashy, try using a light color spray paint, such as white or silver.
Finally, make sure you clean your furniture before painting it. Use a soft brush and a vacuum to remove any dust or debris that may show through the finish.
Now you're ready to move on to the next step!
Color placement is just as crucial as choosing the proper paint colors. Where there is a chair rail, use this hue solely above the chair rail. I recommend painting the area behind the chair rail the same white as the trim and kitchen cabinets, in the same finish (probably semi-gloss). This will help the room look larger and more open.
Painting the area above the chair rail should be your first step toward decorating here. Use a light hand with color, but don't forget about this important area of the wall. You can also add some interest by using a wallpaper border or stenciling on the edge of the panel.
Finally, if you want to add warmth to the room, consider adding a wood burning stove, fireplace, or decorative tiles. These options are great if you want the room to have its own unique style, while still staying within the boundaries of a neutral palette.
If you try to cover the lacquered furniture with one thick layer of paint, you may wind up with a sloppy finish. To begin with, because lacquered paint is smooth and glossy, it is unsuitable for paint adherence. Abrasion procedures will be required to condition the lacquered surface. Then, when paint is applied over top, it tends to shed sanding dust and scratches from the underlying material.
The best way to paint lacquered furniture is to use several thin layers of paint, with at least an hour between coats. The time it takes for paint to dry depends on the weather and the type of paint used, but most rooms can be painted within a week if there are no rain delays.
It's recommended that you test out your paintbrush before starting a new project. This will help you achieve a consistent finish and avoid any mistakes. You should also take your time and do not rush through this process. A finished project should look good and last for many years once it is done.
When it's completely dried, sand it again until the surface is smooth. Make sure to smooth away any rough edges. Unless you prime your polyurethane-treated furniture, your paint will not adhere effectively. Because other types of paint primers are incompatible with a polyurethane finish, an oil-based primer is your best alternative. The manufacturer of your furniture likely has instructions on how to prepare your furniture for painting.
Once your furniture is primed and ready for paint, go over the entire piece with a semi-gloss or flat clear coat to protect it from sunlight and weathering damage. The important thing is to follow the instructions on the packaging of your paint. If you put too much paint on your furniture, it will be difficult to get all of it out once it's dry.
The most common type of paint used on furniture is acrylic. It's easy to work with and doesn't smell like other paints do. Acrylics come in many colors and can be thinned with water for a lighter touch. They also dry very quickly which makes them convenient if you're working with small items. Acrylics don't stick as well to some materials so consider this before choosing an acrylic paint. Some materials include: wood, fiberglass, leather, vinyl, and metal.
If you want to use another type of paint instead, go for it! There are many options available today. Consider what qualities you want in a paint job and choose one that fits those needs.